Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 25
| Issue Date | Title | Author(s) |
| 2016 | Stress and deformation analysis of the master leaf of an automobile leaf spring | Saha, Kashi Nath; Ghuku, Sushanta |
| 2016 | Thermal analysis for Fourier heat conduction in a slab for isotropic and orthotropic materials | Kundu, Balaram; Sen, Tanusri |
| 2016 | Experimental investigation of friction and wear of heat treated AISI 304 stainless steel against EN-8 stainless steel using a multitribotester and effect of microstructure on wear behaviour | Mukhopadhyay, Abhijit; Kumar, Santosh |
| 2016 | A study on buckling analysis of functionally graded material beams | Das, Debabrata; Majumdar, Aritra |
| 2016 | Experimental observation on MS plate cooling by air jet in a laboratory scale ROT | Mandal, Pranibesh; Sen, Swarnendu; Mukhopadhyay, Souvik |
| 2016 | Dynamic contact interactions of rough fractal surfaces | Sahoo, Prasanta; Mitra, Anirban; Jana, Tamonash |
| 2016 | Preparation and tribological characterization of ni-p coated glass fiber reinforced epoxy composites | Modak, Nipu; Sahoo, Prasanta; Sarkar, Jayanta |
| 2016 | Study on some aspects of dissimilar welding of ferritic stainless steel to mild steel by submerged arc welding and process optimization | Nandi, Gautam; Pal, Pradip Kumar; Kumar, Ranjeet |
| 2016 | Studies on fluid flow and heat transfer characteristics for flow through a rectangular microchannel—an analytical approach | Simlandi, Sudip; Ash, Arnab |
| 2016 | Study of a miniature vane pump | Saha, Rana; Kumar, Sawan |
| 2016 | Design of a heat exchanger for waste heat recovery from an automobile engine and to use it for air-conditioning of the automobile by a vapour absorption system | Chakraborty, Ranajit kumar; Bhattacharya, Arijit |
| 2016 | Green manufacturing in turning operation for efficient cutting by application of vegetable oil as cutting fluid | Bandyopadhyay, Asish; Ghosh, Sadhan Kr.; Nandi, Titas; Das, Subhadip |
| 2016 | Experimental and theoretical study of hydraulic jump in a horizontal channel | Ghosal, Sujit; Rai, Avanish |
| 2016 | Numerical and experimental study of open channel flow with and without baffle | Roy, Debasish; Majumder, Snehamoy; Ghosh, Sanchari |
| 2016 | Inexpensive method for data acquisition and monitoring in vibrating structures using microcontrollers | Nandi, Arghya; Neogy, Sumanta; Das, Dipankar |
| 2019 | Friction and Wear Behaviour of Aluminium Silicon Carbide Metal Matrix Composite under Lubricated Condition | Barman, Tapan Kumar; Sahoo, Prasanta; Mondal, Samar |
| 2019 | Numerical simulation of 3-D turbulent flow and heat transfer over backward facing step And through a rectangular duct with baffles | Majumder, Snehamoy; Roy, Debasish; Afzal Hussain |
| 2019 | Trajectory Planning for a Six-Legged Walking Robot and its Experimental Validation | Modak, Nipu; Naskar, Tarun Kanti; Guin, Bhaskar |
| 2019 | Electroless Ni-Sn-P Coatings: Preparation and Tribological Characterization | Sen, Rajat Shubra; Majumder, Gautam; Oraon, Buddhadeb; Kumar, Naveen |
| 2019 | Optimization of LCF Material Parameters of 20MnMoNi55 Low Alloy RPV Steel Using GA in Tandem with FE Software ABAQUS | Acharyya, Sanjib Kumar; Mal, Subhayan |
Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 25
