http://20.198.91.3:8080/jspui/handle/123456789/205 2026-04-05T21:00:10Z 2026-04-05T21:00:10Z Maity, Prashna http://20.198.91.3:8080/jspui/handle/123456789/9462 2026-02-11T07:03:32Z 2024-01-01T00:00:00Z

Title: Laser machining of 7075 t6 aluminium alloy and effect of thermal treatment on tensile and hardness Authors: Maity, Prashna

2024-01-01T00:00:00Z Maity, Rittik http://20.198.91.3:8080/jspui/handle/123456789/9461 2026-02-11T06:55:25Z 2024-01-01T00:00:00Z

Title: Design and development of laser module holder bracket and z-axis slide of a mini laser engraver Authors: Maity, Rittik

2024-01-01T00:00:00Z Roy, Krishna Chandra http://20.198.91.3:8080/jspui/handle/123456789/9460 2026-02-11T06:35:07Z 2024-01-01T00:00:00Z

Title: Numerical investigation of thermal damage during laser drilling process Authors: Roy, Krishna Chandra Abstract: Laser drilling is an advanced non-contact machining process which is a preferred choice in industrial applications due to its several advantages like precise hole, high positional accuracy, high repeatability etc. Geometry of the drilled hole like hole diameter and depth are important characteristics that greatly influence the quality of a drilled hole. In this work, a numerical model of transient heat transfer and thermal damage evaluation in Poly-methyl methacrylate (PMMA) material is presented using COMSOL Multiphysics®. Required material properties for the model are taken from available literatures. PMMA was selected due to its uniformity, isotropy, and the ease of characterizing its decomposition from solid to gas. A Gaussian heat flux is modeled and used as high energy laser beam. Ablation temperature of the material is considered as 698 k. The removal of material is modeled using deformed geometry interface module which is available in comsol multiphysics. After modelling, the parametric study has been done by varying laser power, beam diameter, and plater thickness to investigate about the thermal damage in terms of hole diameter and depth. To conduct the parametric study, central composite design (CCD) based design of experiment (DOE) has been generated using Design-Expert® software. 3D surface plots and contour plots are presented and discussed to illustrate the effect of input parameters on responses. It can be concluded from the results that laser power and spot diameter have a significant effect on drilled hole depth and hole diameter.

2024-01-01T00:00:00Z Ghosh, Saurav Kumar http://20.198.91.3:8080/jspui/handle/123456789/8662 2025-09-18T06:30:08Z 2023-01-01T00:00:00Z

Title: Laser welding of dissimilar materials: mathematical & numerical modelling Authors: Ghosh, Saurav Kumar

2023-01-01T00:00:00Z